Verifying The Configuration - Aruba IAP-335 User Manual

If a time range is disabled, the SSID becomes unavailable for the configured time range. For example, if
l
the configured time range is 14:00–17:00, the SSID is made unavailable from 2 PM to 5 PM on a given
day.
4. Click Next and then click Finish.
If the SSID has two time range profiles enabled with an overlapping duration, the time range profile will be
executed as per the configuration conditions described earlier in this chapter. For example, if profile1 has
9AM-12PM as the duration and profile2 has 10AM-11AM as the duration and both are enabled on the SSID,
the SSID becomes available only in the time range 9AM-11AM.
In the CLI
To enable a time range profile on an SSID:
(Instant AP)(config)# wlan ssid-profile <name>
(Instant AP)(SSID Profile "<name>")# time-range <name> enable
(Instant AP)(SSID Profile "<name>")# end
(Instant AP)# commit apply
To disable a time range profile on an SSID:
(Instant AP)(config)# wlan ssid-profile <name>
(Instant AP)(SSID Profile "<name>")# time-range <name> disable
(Instant AP)(SSID Profile "<name>")# end
(Instant AP)# commit apply

Verifying the Configuration

To view the time range profiles created on an IAP:
(Instant AP) # show time-range
Time Range Summary
------------------
Profile Name
------------
test
test1
Lunchbreak
Lunchbreak1
To verify if the time range profile is enabled on an SSID:
(Instant AP)# show time-profile
Time Range SSID Profile
-----------------------
Time Profile Name
-----------------
Lunch Break
Example
The following command creates an absolute time range profile :
(Instant AP)(config)# time-range timep1 absolute start 10/20/2013 10:40 end 10/20/2015 10:50
The following command creates a periodic time range profile that executes on the specified day of the week:
(Instant AP)(config)# time-range timep2 periodic monday 10:40 to tuesday 10:50
The following command creates a periodic time range profile that executes daily:
(Instant AP)(config)# time-range testhshs12 periodic daily 10:20 to 10:35
The following command creates a periodic time range profile that executes during the weekday:
(Instant AP)(config)# time-range timep3 periodic weekday 10:20 to 10:35
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Type Start Day
---- ---------
Periodic daily
Absolute 11/17/2015
Periodic weekday
Periodic daily
SSID profile Name
-----------------
Test123
Start Time End Day
---------- -------
13:00 -
10:00 11/24/2015
12:00 -
12:00 -
Enable/Disable
--------------
Enable
End Time Valid
-------- -----
14:00 No
17:00 No
13:00 No
13:00 No
Configuring Time-Based Services | 223