Ldap Server Configuration Parameters - Aruba IAP-335 User Manual

To assign the RADIUS authentication server to a network profile, select the newly added server when
configuring security settings for a wireless or wired network profile.
You can also add an external RADIUS server by selecting the New option when configuring a WLAN or wired
profile. For more information, see
Configuring Security Settings for a Wired Profile on page
LDAP—To configure an LDAP server, select the LDAP option and configure the attributes described in the
l
following table:
Table 34: LDAP Server Configuration Parameters
Parameter
Name
IP address
Auth port
Admin-DN
Admin
password
Base-DN
Filter
Key
Attribute
Timeout
Retry count
Dead Time
TACACS—To configure TACACS server, select the TACACS option and configure the following parameters:
l
158 | Authentication and User Management
Configuring Security Settings for a WLAN SSID Profile on page 90
Description
Enter a name for the server.
Enter the IP address of the LDAP server.
Enter the authorization port number of the LDAP server. The default port number is 389.
Enter a distinguished name for the admin user with read/search privileges across all the entries in
the LDAP database (the user need not have write privileges, but the user must be able to search the
database, and read attributes of other users in the database).
Enter a password for administrator.
Enter a distinguished name for the node that contains the entire user database.
Specify the filter to apply when searching for a user in the LDAP database. The default filter string is
(objectclass=*).
Specify the attribute to use as a key while searching for the LDAP server. For Active Directory, the
value is sAMAccountName
Enter a value between 1 and 30 seconds. The default value is 5.
Enter a value between 1 and 5. The default value is 3.
Specify a dead time for the authentication server in minutes within the range of 1–1440 minutes.
The default dead time interval is 5 minutes.
When two or more authentication servers are configured on the IAP and a server is unavailable, the
dead time configuration determines the duration for which the authentication server would be
available if the server is marked as unavailable.
110.
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
and