Pre-Installation Checklist; Verifying Pre-Installation Connectivity; Identifying Specific Installation Locations - Aruba 303 Series Installation Manual

EU Statement:
Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please refer to the ArubaOS/Instant
User Guide for details on restrictions.
Produit réseau local radio basse puissance operant dans la bande fréquence 2.4 GHz et 5 GHz. Merci de vous
!
referrer au ArubaOS/Instant User Guide pour les details des restrictions.
Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere Informationen bezlüglich
Einschränkungen finden Sie im ArubaOS/Instant User Guide.
Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento alla ArubaOS/Instant User
Guide per avere informazioni detagliate sulle restrizioni.

Pre-Installation Checklist

Before installing the 303 Series access point, be sure that you have the following:
Cat5E or better UTP cable

One of the following power sources:

IEEE 802.3af-compliant Power over Ethernet (PoE) source

Aruba AP-AC2-12B adapter kit (sold separately)

For 303 Series access point running ArubaOS only:
Aruba controller provisioned on the network

Layer 2/3 network connectivity to your access point

One of the following network services:

Aruba Discovery Protocol (ADP)

DNS server with an "A" record

DHCP Server with vendor specific options

Aruba Networks, Inc., in compliance with governmental requirements, has designed this device so that only
authorized network administrators can change the settings. For more information about access point
configuration, refer to the ArubaOS Quick Start Guide and ArubaOS User Guide.
Access points are radio transmission devices and as such are subject to government regulations of the host
!
country. The network administrator(s) is/are responsible for ensuring that configuration and operation of this
equipment is in compliance with their country's regulations. For a complete list of approved channels in your
country, refer to the Aruba Downloadable Regulatory Table at www.arubanetworks.com.

Verifying Pre-Installation Connectivity

The instructions in this section are applicable to the 303 Series access points running ArubaOS only.
Before you install access points in a network environment, make sure that the access points will be able to locate
and connect to the controller when they are powered on. Specifically, you must verify the following conditions:
When connected to the network, each access point is assigned a valid IP address.

Access points are able to locate the controller.

Refer to the ArubaOS Quick Start Guide for instructions on locating and connecting to the controller.

Identifying Specific Installation Locations

Use the access point placement map generated by Aruba's RF Plan software application to determine the proper
Aruba 303 Series Campus Access Points
| Installation Guide
5