Configuring An Iap For Rtls Support - Aruba IAP-335 User Manual

Configuring an IAP for RTLS Support
Instant supports the real-time tracking of devices when integrated with the AMP or a third-party Real Time
Location Server such as Aeroscout Real Time Location Server. With the help of the RTLS, the devices can be
monitored in real time or through history.
You can configure RTLS by using the Instant UI or the CLI.
In the Instant UI
To configure Aruba RTLS:
1. Click the More > Services link on the Instant main window.
2. In the Services section, click the RTLS tab.
3. Under Aruba, select the RTLS check box to integrate Instant with the AMP or Ekahau Real Time Location
Server. The following figure shows the contents of the RTLS tab.
Figure 77 RTLS Window
4. Specify the IP address and port to which the location reports must be sent.
5. Specify the shared secret key in the Passphrase text box.
6. In the Update text box, specify the frequency at which the VC can send updates to the server. You can
specify a value within the range of 5-3600 seconds. The default value is 5 seconds.
7. Select the Include unassociated stations check box to send reports to the RTLS server about the
stations that are not associated to any IAP.
8. Click OK.
To configure third-party RTLS such as Aeroscout:
1. Select the Aeroscout check box to send the RFID tag information to an AeroScout RTLS.
2. Specify the IP address and port number of the AeroScout server to which location reports must be sent.
3. Select the Include unassociated stations check box to send reports on the stations that are not
associated to any IAP to the Aeroscout RTLS server.
4. Click OK.
In the CLI
To configure AirWave RTLS:
(Instant AP)(config)# airwave-rtls <IP-address> <port> <passphrase> <seconds> include-unassoc-
sta
(Instant AP)(config)# end
291 | Services Aruba Instant 6.5.0.0-4.3.0.0 | User Guide