Rf Visualization Support For Instant; Adding An Iap In Visualrf; Psk-Based And Certificate-Based Authentication; Configurable Port For Iap And Airwave Management Server Communication - Aruba IAP-335 User Manual

The WIDS report cites the number of IDS events for devices that have experienced the most instances in the
prior 24 hours and provides links to support additional analysis or configuration in response.
RF Visualization Support for Instant
AirWave supports RF visualization for Instant. The VisualRF module provides a real-time picture of the actual
radio environment of your wireless network and the ability to plan the wireless coverage of new sites. VisualRF
uses sophisticated RF fingerprinting to accurately display coverage patterns and calculate the location of every
Instant device in range. VisualRF provides graphical access to floor plans, client location, and RF visualization for
floors, buildings, and campuses that host your network.
Figure 83 Adding an IAP in VisualRF

PSK-Based and Certificate-Based Authentication

On the DHCP server, two formats for option 43 are supported:
<organization>,<ams-ip>,<ams-key>—If you select this format, the IAP authenticates the AMP server
l
using the Pre-Shared Key (PSK) login process.
<organization>,<ams-domain>—If you select this format, the IAP resolves the AirWave domain name
l
into one or two IP addresses as AirWave Primary or AirWave Backup, and then IAP starts a certificate-based
authentication with AMP server, instead of the PSK login. When the AMP domain name is used, the IAP
performs certificate-based authentication with the AMP server. The IAP initiates a Secure Socket Layer (SSL)
connection with the AirWave server. The AirWave server verifies the signature and public key certificate
from the IAP. If the signature matches, the AirWave responds to the IAP with the login request.

Configurable Port for IAP and AirWave Management Server Communication

You can now customize the port number of the AMP server through the server_host:server_port format, for
example, amp.aruba.com:4343.
The following example shows how to configure the port number of the AMP server:
24:de:c6:cf:63:60 (config) # ams-ip 10.65.182.15:65535
24:de:c6:cf:63:60 (config) # end
24:de:c6:cf:63:60# commit apply
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide IAP Management and Monitoring | 307