Table of Contents
Advertisement
For information on configuring access rules based on application and application categories, see
l
ACL Rules for Application and Application Categories on page
For information on configuring access rules based on web categories and web reputation, see
l
Web Policy Enforcement Service on page
In the Instant UI
To configure ACL rules for a user role:
1. Navigate to Security > Roles. The Roles tab contents are displayed.
Alternatively, you can configure access rules for a wired or wireless client through the WLAN wizard or the
Wired Profile window.
a. To configure access rules through the Wired Profile window:
Navigate to More > Wired.
l
Click Edit and then Edit Wired Network.
l
Click Access.
l
b. To configure access rules through WLAN wizard:
Navigate to Network > WLAN SSID.
l
Click Edit and then Edit WLAN.
l
Click Access.
l
2. Select the role for which you want to configure access rules.
3. In the Access rules section, click New to add a new rule. The New Rule window is displayed.
4. Ensure that the rule type is set to Access Control.
5. To configure a rule to control access to network services, select Network under service category and specify
the following parameters:
183
| Roles and Policies
270.
273.
Configuring
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Configuring
Hide quick links:
Advertisement
Table of Contents
