Aruba IAP-335 User Manual page 56

Instant software
Hide thumbs Also See for IAP-335:
Table of Contents

Advertisement

Table 16: Alerts List
Description
Code
100410
100511
101012
IDS
The IDS link displays a list of foreign IAPs and foreign clients that are detected in the network. It consists of the
following sections:
Foreign Access Points Detected—Lists the IAPs that are not controlled by the VC. The following
l
information is displayed for each foreign IAP:
MAC address—Displays the MAC address of the foreign IAP.
n
Network—Displays the name of the network to which the foreign IAP is connected.
n
Classification—Displays the classification of the foreign IAP, for example, Interfering IAP or Rogue IAP.
n
Channel—Displays the channel in which the foreign IAP is operating.
n
Type—Displays the Wi-Fi type of the foreign IAP.
n
Last seen—Displays the time when the foreign IAP was last detected in the network.
n
Where—Provides information about the IAP that detected the foreign IAP. Click the push pin icon to
n
view the information.
Foreign Clients Detected— Lists the clients that are not controlled by the VC. The following information
l
is displayed for each foreign client:
MAC address—Displays the MAC address of the foreign client.
n
Network—Displays the name of the network to which the foreign client is connected.
n
Classification—Displays the classification of the foreign client: Interfering client.
n
Channel—Displays the channel in which the foreign client is operating.
n
Type—Displays the Wi-Fi type of the foreign client.
n
Last seen—Displays the time when the foreign client was last detected in the network.
n
56
| Instant User Interface
Description
Integrity check failure in
encrypted message
DHCP request timed out
Wrong Client VLAN
Details
The IAP cannot receive data
from this client because the
integrity check of the
received message (MIC) has
failed. Recommend
checking the encryption
setting on the client and on
the IAP.
This client did not receive a
response to its DHCP
request in time.
Recommend checking the
status of the DHCP server in
the network.
VLAN mismatch between
the IAP and the upstream
device. Upstream device
can be upstream switch or
RADIUS server.
Corrective Actions
Check the encryption setting on
the client and on the IAP.
Check the status of the DHCP
server in the network.
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF