Aruba IAP-335 User Manual page 359

Figure 109 Rebooting the IAP
3. In the IAP list, select the IAP that you want to reboot and click Reboot selected Access Point. To reboot
all the IAPs in the network, click Reboot All.
4. The Confirm Reboot for AP message is displayed. Click Reboot Now to proceed. The Reboot in
Progress message is displayed indicating that the reboot is in progress. The Reboot Successful message is
displayed after the process is complete. If the system fails to boot, the Unable to contact Access Points
after reboot was initiated message is displayed.
5. Click OK.
359 | IAP Maintenance Aruba Instant 6.5.0.0-4.3.0.0 | User Guide