Supported Iap Variants - Aruba IAP-335 User Manual

Table 3: Supported IAP Platforms
IAP Platform
IAP-114/115
IAP-224/225
RAP-155/155P
RAP-108/109
Each IAP model has a minimum required Instant software version as shown in
added into an existing cluster, it can join the cluster only if the existing cluster is running at least the minimum
required version of that IAP. If the existing cluster is running a version prior to the minimum required version
of the new IAP, new IAP will not come up and may reboot with the reason Image sync fail. To recover from
this condition, upgrade the existing cluster to at least the minimum required version of the new IAP first, and
add the new IAP.
Aruba recommends that networks with more than 128 IAPs be designed as multiple, smaller VC networks with
Layer-3 mobility enabled between these networks.
Aruba IAPs are available in the following variants:
US (United States)
l
JP (Japan)
l
IL (Israel)
l
RW
l
The following table provides the variants supported for each IAP platform:
Table 4: Supported IAP Variants
IAP Model (Reg
Domain)
IAP-334/335
IAP-314/315
IAP-324/325
IAP-277
IAP-274/275
13 | About Aruba Instant
Minimum Required Instant Software Version
Instant 6.3.1.1-4.0.0.0 or later
Instant 6.2.1.0-3.3.0.0 or later
Instant 6.2.0.0-3.2.0.0 or later
IAP-###-JP
IAP-###-US
(US only)
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
IAP-###-IL
(Japan (Israel
only) only)
Yes
Yes
Yes
No
Yes
Table 3. When a new IAP is
IAP-###-RW
(Rest of the
World
except
US/JP/IL)
Yes
Yes
Yes
Yes
Yes
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide