Ip And Vlan Assignment For Wlan Ssid Clients - Aruba IAP-335 User Manual

Table 25: IP and VLAN Assignment for WLAN SSID Clients
Client IP Assignment
Virtual Controller
assigned
Network assigned
9. Click Next to configure
guest users.
If the client IP assignment mode is set to Network assigned in a guest SSID profile, the guest clients can log
out of the captive portal network by accessing the
URL.
In the CLI
To configure WLAN settings for an SSID profile:
(Instant AP)(config)# wlan ssid-profile <name>
(Instant AP)(SSID Profile <name>)# essid <ESSID-name>
(Instant AP)(SSID Profile <name>)# type <Guest>
(Instant AP)(SSID Profile <name>)# broadcast-filter <type>
(Instant AP)(SSID Profile <name>)# dtim-period <number-of-beacons>
(Instant AP)(SSID Profile <name>)# multicast-rate-optimization
(Instant AP)(SSID Profile <name>)# dynamic-multicast-optimization
(Instant AP)(SSID Profile <name>)# dmo-channel-utilization-threshold
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Client VLAN Assignment
If the Virtual Controller assigned is selected for client IP assignment, the VC creates
a private subnet and VLAN on the IAP for the wireless clients. The network address
translation for all client traffic that goes out of this interface is carried out at the
source. This setup eliminates the need for complex VLAN and IP address management
for a multi-site wireless network.
On selecting this option, the following client VLAN assignment options are displayed:
Default: When selected, the default VLAN as determined by the VC is assigned for
l
clients.
Custom: When selected, you can specify a custom VLAN assignment option. You
l
can select an existing DHCP scope for client IP and VLAN assignment or you can
create a new DHCP scope by selecting New. For more information on DHCP
scopes, see Configuring DHCP Scopes on page
If the Network assigned is selected, you can specify any of the following options for
the Client VLAN assignment.
Default—On selecting this option, the client obtains the IP address in the same
l
subnet as the IAPs. By default, the client VLAN is assigned to the native VLAN on
the wired network.
Static—On selecting this option, you need to specify a single VLAN, a comma
l
separated list of VLANS, or a range of VLANs for all clients on this network. Select
this option for configuring
Dynamic—On selecting this option, you can assign the VLANs dynamically from a
l
Dynamic Host Configuration Protocol (DHCP) server. To create VLAN assignment
rules, click New to assign the user to a VLAN. In the New VLAN Assignment Rule
window, enter the following information:
Attribute—Select an attribute returned by the RADIUS server
l
during authentication.
Operator—Select an operator for matching the string.
l
String—Enter the string to match
l
VLAN—Enter the VLAN to be assigned.
l
internal or external captive portal
https://securelogin.arubanetworks.com/auth/logout.html
211.
VLAN pooling.
authentication, roles, and access rules
Captive Portal for Guest Access |
for the
123