Running Debug Commands - Aruba IAP-335 User Manual

In the Instant UI
To configure a TFTP server:
1. In the Instant main window, click the System link.
2. Click Show advanced options to display the advanced options.
3. Click the Monitoring tab.
4. Enter the IP address of the TFTP server in the TFTP Dump Server text box.
5. Click OK.
In the CLI
To configure a TFTP server:
(Instant AP)(config)# tftp-dump-server <IP-address>
(Instant AP)(config)# end
(Instant AP)# commit apply

Running Debug Commands

To run the debugging commands from the UI:
1. Navigate to More > Support on the Instant main window.
2. Select the required option from the Command drop-down list.
3. Select All Access Points or Instant Access Point(VC) from the Target drop-down list.
4. Click Run. When you run debug commands and click Save, the output of all the selected commands is
displayed in a single page.
The Support window allows you to run commands for each access point and VC in a cluster. For a complete list
of commands supported in a particular release train, execute the show support-commands command at the
IAP CLI. The output of this command displays the list of support commands that you can run through the UI
and the corresponding CLI commands. For more information on these commands, refer to the respective
command page in the Aruba Instant 6.5.0.0-4.3.0.0 CLI Reference Guide.
(Instant AP) # show support-commands
Support Commands
----------------
Description
-----------
AP Tech Support Dump
AP Tech Support Dump Supplemental
AP Provisioning Status
AP 3G/4G Status
AP 802.1X Statistics
AP Access Rule Table
AP Inbound Firewall Rules
AP Active
AP AirGroup Cache
AP AirGroup CPPM Entries
AP AirGroup CPPM Servers
AP AirGroup Debug Statistics
AP AirGroup Servers
AP AirGroup User
AP ALE Configuration
AP ALE Status
AP Allowed Channels
AP Allowed MAX-EIRP
AP All Supported Timezones
AP ARM Bandwidth Management
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Command Name
------------
show tech-support
show tech-support supplemental
show activate status
show cellular status
show ap debug dot1x-statistics
show access-rule-all
show inbound-firewall-rules
show aps
show airgroup cache entries
show airgroup cppm entries
show airgroup cppm server
show airgroup debug statistics
show airgroup servers verbose
show airgroup users verbose
show ale config
show ale status
show ap allowed-channels
show ap allowed-max-EIRP
show clock timezone all
show ap arm bandwidth-management
Monitoring Devices and Logs | 366