External Captive Portal Configuration Parameters - Aruba IAP-335 User Manual

In the CLI
To configure an external captive portal profile:
(Instant AP)(config)# wlan external-captive-portal [profile_name]
(Instant AP)(External Captive Portal)# server <server>
(Instant AP)(External Captive Portal)# port <port>
(Instant AP)(External Captive Portal)# url <url>
(Instant AP)(External Captive Portal)# https
(Instant AP)(External Captive Portal)# redirect-url <url>
(Instant AP)(External Captive Portal)# server-fail-through
(Instant AP)(External Captive Portal)# no auto-whitelist-disable
(Instant AP)(External Captive Portal)# server-offload
(Instant AP)(External Captive Portal)# switch-ip
(Instant AP)(External Captive Portal)# prevent-frame-overlay
(Instant AP)(External Captive Portal)# end
(Instant AP)# commit apply
Configuring an SSID or Wired Profile to Use External Captive Portal
Authentication
You can configure external captive portal authentication when adding or editing a guest network profile using
the Instant UI or the CLI.
In the Instant UI
1. Navigate to the WLAN wizard or Wired window.
To configure external captive portal authentication for a WLAN SSID, on the Network tab, click New to
l
create a new network profile or edit to modify an existing profile.
To configure external captive portal authentication for a wired profile, Go to More > Wired. In the Wired
l
window, click New under Wired Networks to create a new network, or click Edit to select an existing
profile.
2. On the Security tab, select External from the Splash page type drop-down list.
3. From the Captive Portal Profile drop-down list, select a profile. You can select and modify a default
profile, or an already existing profile, or click New and
4. Configure the following parameters based on the type of splash page you selected.
Table 28: External Captive Portal Configuration Parameters
Parameter
Captive-portal proxy
server
WISPr
MAC authentication
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Description
If required, configure a captive portal proxy server or a global proxy server to match your
browser configuration by specifying the IP address and port number in the Captive-portal
proxy server text box.
Select Enabled if you want to enable WISPr authentication. For more information on WISPr
authentication, see Configuring WISPr Authentication on page
NOTE: The WISPr authentication is applicable only for the External and Internal-
Authenticated splash pages and is not applicable for wired profiles.
Select Enabled if you want to enable MAC authentication. For information on MAC
authentication, see Configuring MAC Authentication for a Network Profile on page
create a new profile.
Captive Portal for Guest Access |
175.
170.
131