Enforcing Dhcp; Configuring Security Settings For A Wlan Ssid Profile - Aruba IAP-335 User Manual

Enforcing DHCP

Starting from Instant 6.4.3.4-4.2.1.0, you can configure a WLAN SSID profile to enforce DHCP on IAP clients.
When DHCP is enforced:
A layer-2 user entry is created when a client associates with an IAP.
l
The client DHCP state and IP address are tracked.
l
When the client obtains an IP address from DHCP, the DHCP state changes to complete.
l
If the DHCP state is complete, a layer-3 user entry is created.
l
When a client roams between the IAPs, the DHCP state and the client IP address will be synchronized with
l
the new IAP.
By default, enforcing DHCP feature is disabled.
To enforce DHCP:
(Instant AP)(config)# wlan ssid-profile <name>
(Instant AP)(SSID Profile <name>)# enforce-dhcp
(Instant AP)(SSID Profile <name>)# end
(Instant AP)# commit apply

Configuring Security Settings for a WLAN SSID Profile

This section describes the procedure for configuring security settings for an Employee or Voice network. For
information on guest network configuration, see
If you are creating a new SSID profile, configure the WLAN and VLAN settings before defining security
settings. For more information, see
Configuring VLAN Settings for a WLAN SSID Profile on page
Configuring Security Settings for an Employee or Voice Network
You can configure security settings for an Employee or Voice network by using the Instant UI or the CLI.
In the Instant UI
To configure security settings for an Employee or Voice network:
1. On the Security tab, specify any of the following types of security levels by moving the slider to a desired
level:
Enterprise—On selecting the enterprise security level, the authentication options applicable to the
l
enterprise network are displayed.
Personal—On selecting the personal security level, the authentication options applicable to the
l
personalized network are displayed.
Open—On selecting the open security level, the authentication options applicable to an open network
l
are displayed.
The default security setting for a network profile is Personal.
The following figures show the configuration options for Enterprise, Personal, and Open security
settings:
90 | Wireless Network Profiles
Captive Portal for Guest
Configuring WLAN Settings for an SSID Profile on page 82
87.
Access.
and
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide