Aruba IAP-335 User Manual page 383

Table 81: Hotspot Profile Configuration Parameters
Parameter
group-frame-block
hessid
internet
p2p-cross-connect
p2p-dev-mgmt
pame-bi
query-response-
length-limit
roam-cons-len-1
roam-cons-len-2
roam-cons-len-3
venue-group
venue-type
383 | Hotspot Profiles
Description
Enable this parameter if you want to stop the IAP from sending forward downstream
group-addressed frames.
Specify a Homogenous Extended Service Set Identifier (HESSID) in a hexadecimal format
separated by colons.
Specify this parameter to allow the IAP to send an Information Element (IE) indicating that
the network allows Internet access.
Specify this parameter to advertise support for P2P cross-connections.
Specify this parameter to advertise support for P2P device management.
Specify this parameter to enable Pre-Association Message Exchange BSSID Independent
(PAME-BI) bit, with which the IAP can indicate that the Advertisement Server can return a
query response independent of the BSSID used in the GAS Frame exchange.
Specify this parameter to set the maximum length of the GAS query response, in octets.
You can specify a value within the range of 1–127. The default value is 127.
Specify the length of the organization identifier (OI). That is, the value for the length of OIs
of roam-cons-len-1, roam-cons-len-2, or roam-cons-len-3. The roaming consortium OI is
based on the following parameters:
0: Zero Octets in the OI (Null)
l
3: OI length is 24-bits (3 Octets)
l
5: OI length is 36-bits (5 Octets)
l
Specify one of the following venue groups
unspecified
l
assembly
l
business
l
educational
l
factory-and-industrial
l
institutional
l
mercantile
l
outdoor
l
residential
l
storage
l
utility-misc
l
vehicular
l
By default, the business venue group is used.
Specify a venue type to be advertised in the ANQP IEs from IAPs associated with this
hotspot profile. For more information about the supported venue types for each venue
group, see Table 80.
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide