Backing up and Restoring IAP Configuration Data
You can back up the IAP configuration data and restore the configuration when required.
Viewing Current Configuration
To view the current configuration on the IAP:
In the UI, navigate to Maintenance > Configuration > Current Configuration.
l
In the CLI, enter the following command at the command prompt:
l
(Instant AP)# show running-config
Backing up Configuration Data
To back up the IAP configuration data:
1. Navigate to the Maintenance > Configuration page.
2. Click Backup Configuration.
3. Click Continue to confirm the backup. The instant.cfg containing the IAP configuration data is saved in your
local file system.
4. To view the configuration that is backed up by the IAP, enter the following command at the command
prompt:
(Instant AP)# show backup-config
Restoring Configuration
To restore configuration:
1. Navigate to the Maintenance > Configuration page.
2. Click Restore Configuration.
3. Click Browse to browse your local system and select the configuration file.
4. Click Restore Now.
5. Click Restore Configuration to confirm restoration. The configuration is restored and the IAP reboots to
load the new configuration.
(Instant AP)(config)# copy config tftp://x.x.x.x/confgi.cfg
351
| IAP Maintenance
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide