Configuring A Wan Metrics Profile; Creating A Hotspot Profile - Aruba IAP-335 User Manual

(Instant AP)(operator-class <name>)# op-class <class-ID>
(Instant AP)(operator-class <name>)# enable
(Instant AP)(operator-class <name>)# end
(Instant AP)# commit apply

Configuring a WAN Metrics Profile

You can configure a WAN metrics profile to define information about access network characteristics such as
link status and metrics.
To configure a WAN metrics profile:
(Instant AP)(config)# hotspot h2qp-wan-metrics-profile <name>
(Instant AP)(WAN-metrics <name>)# at-capacity
(Instant AP)(WAN-metrics <name>)# downlink-load <load>
(Instant AP)(WAN-metrics <name>)# downlink-speed <speed>
(Instant AP)(WAN-metrics <name>)# load-duration <duration>
(Instant AP)(WAN-metrics <name>)# symm-link
(Instant AP)(WAN-metrics <name>)# uplink-load <load>
(Instant AP)(WAN-metrics <name>)# uplink-speed <speed>
(Instant AP)(WAN-metrics <name>)# wan-metrics-link-status <status>
(Instant AP)(WAN-metrics <name>)# end
(Instant AP)# commit apply
You can specify the following WAN downlink and uplink parameters:
Downlink load—Indicates the percentage of the WAN downlink currently utilized. The default value of 0
l
indicates that the downlink speed is unknown or unspecified.
Downlink speed—Indicates the WAN downlink speed in Kbps.
l
Uplink load—Indicates the percentage of the WAN uplink currently utilized. The default value of 0 indicates
l
that the downlink speed is unknown or unspecified.
Uplink speed—Indicates the WAN uplink speed in Kbps.
l
Load duration—Indicates the duration in seconds during which the downlink utilization is measured.
l
Symmetric links—Indicates if the uplink and downlink have the same speed.
l
WAN Link Status—Indicates if the WAN is down (link-down), up (link-up), or in test state (link-under-test).
l

Creating a Hotspot Profile

To create a hotspot profile:
(Instant AP)(config)# hotspot hs-profile <name>
(Instant AP)(Hotspot2.0 <name>)# asra
(Instant AP)(Hotspot2.0 <name>)# access-network-type <type>
(Instant AP)(Hotspot2.0 <name>)# addtl-roam-cons-ois <roam-consortium-OIs>
(Instant AP)(Hotspot2.0 <name>)# comeback-mode
(Instant AP)(Hotspot2.0 <name>)# gas-comeback <delay-interval>
(Instant AP)(Hotspot2.0 <name>)# group-frame-block
(Instant AP)(Hotspot2.0 <name>)# hessid <hotspot-essid>
(Instant AP)(Hotspot2.0 <name>)# internet
(Instant AP)(Hotspot2.0 <name>)# p2p-cross-connect
(Instant AP)(Hotspot2.0 <name>)# p2p-dev-mgmt
(Instant AP)(Hotspot2.0 <name>)# pame-bi
(Instant AP)(Hotspot2.0 <name>)# query-response-length-limit <integer>
(Instant AP)(Hotspot2.0 <name>)# roam-cons-len-1 <integer>
(Instant AP)(Hotspot2.0 <name>)# roam-cons-len-2 <integer>
(Instant AP)(Hotspot2.0 <name>)# roam-cons-len-3 <integer>
(Instant AP)(Hotspot2.0 <name>)# roam-cons-oi-1 <integer>
(Instant AP)(Hotspot2.0 <name>)# roam-cons-oi-2 <integer>
(Instant AP)(Hotspot2.0 <name>)# roam-cons-oi-3 <integer>
(Instant AP)(Hotspot2.0 <name>)# venue-group <group>
(Instant AP)(Hotspot2.0 <name>)# venue-type <type>
381 | Hotspot Profiles Aruba Instant 6.5.0.0-4.3.0.0 | User Guide