Tacacs Configuration Parameters - Aruba IAP-335 User Manual

Table 35: TACACS Configuration Parameters
Parameter
Name
IP address
Auth Port
Shared Key
Retype Key
Timeout
Retry Count
Dead time
Session
authorization
You can also add TACACS server by selecting the New option when configuring authentication parameters for
management users. For more information, see
on page 145.
CPPM Server for AirGroup CoA—To configure a ClearPass Policy Manager server used for AirGroup CoA
l
(Change of Authorization), select the CoA only check box. The RADIUS server is automatically selected.
Table 36: ClearPass Policy Manager Server Configuration Parameters for AirGroup CoA
Parameter
Name
Server
address
Air Group CoA
port
Shared key
Retype key
4. Click OK.
The ClearPass Policy Manager server acts as a RADIUS server and asynchronously provides the AirGroup
parameters for the client device including shared user, role, and location.
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Description
Enter a name for the server.
Enter the IP address of the TACACS server.
Enter a TCPIP port used by the server. The default port number is 49.
Enter a secret key of your choice to authenticate communication between the TACACS+ client and
the server.
Re-enter the shared key.
Enter a number between 1 and 30 seconds to indicate the timeout period for TACACS+ requests.
The default value is 20 seconds.
Enter a number between 1 and 5 to indicate the maximum number of authentication attempts. The
default value is 3.
Specify a dead time in minutes within the range of 1–1440 minutes. The default dead time interval
is 5 minutes.
Enables or disables session authorization. When enabled, the optional authorization session is
turned on for the admin users. By default, session authorization is disabled.
Description
Enter a name of the server.
Enter the host name or IP address of the server.
Enter a port number for sending AirGroup CoA on a port different from the standard CoA port.
The default value is 5999.
Enter a shared key for communicating with the external RADIUS server.
Re-enter the shared key.
Configuring Authentication Parameters for Management Users
Authentication and User Management | 159