Table of Contents
Advertisement
Figure 23 Configuration Link
AirWave Setup
AirWave is a solution for managing rapidly changing wireless networks. When enabled, AirWave allows you to
manage the Instant network. For more information on AirWave, see
305. The AirWave status is displayed below the Virtual Controller section of the Instant main window. If the
AirWave status is Not Set Up, click the Set Up Now link to configure AirWave. The System > Admin window
is displayed.
Aruba Central
The Instant UI provides a link to launch a support portal for Aruba Central. You can use Central's evaluation
accounts through this website and get registered for a free account. You must fill in the registration form
available on this page. After you complete this process, an activation link will be sent to your registered ID to
get started.
Pause/Resume
The Pause/Resume link is located on the Instant main window.
The Instant UI is automatically refreshed every 15 seconds by default. Click the Pause link to pause the
automatic refreshing of the Instant UI after every 15 seconds. When the automatic refreshing is paused, the
Pause link changes to Resume. Click the Resume link to resume automatic refreshing.
Automatic refreshing allows you to get the latest information about the network and network elements. You
can use the Pause link when you want to analyze or monitor the network or a network element, and therefore
do not want the UI to refresh.
Views
Depending on the link or tab that is clicked, Instant displays information about the VC, Wi-Fi networks, IAPs, or
the clients in the Info section. The views on the Instant main window are classified as follows:
Virtual Controller view—The VC view is the default view. This view allows you to monitor the Instant
l
network.
The following Instant UI elements are available in this view:
l
Tabs—Networks, Access Points, and Clients. For detailed information on the tabs, see
n
Links—Monitoring, Client Alerts, and IDS. The Spectrum link is visible if you have configured the IAP as a
n
spectrum monitor. These links allow you to monitor the Instant network. For more information on these
links, see
Network view—The Network view provides information that is necessary to monitor a selected wireless
l
network. All Wi-Fi networks in the Instant network are listed in the Network tab. Click the name of the
network that you want to monitor.
58
| Instant User Interface
Monitoring on page
41,
IDS on page
Managing an IAP from AirWave on page
56,
Alerts on page
52, and
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Tabs on page
Spectrum Monitor on page
32.
340.
Hide quick links:
Advertisement
Table of Contents
