Table of Contents
Advertisement
Table 52: Branch Details
Parameter
Assigned
Vlan
Key
Bid(Subnet
Name)
The show iap table command output does not display the Key and Bid(Subnet Name) details.
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Description
Displays the VLAN ID assigned to the branch.
Displays the key for the branch, which is unique to each branch.
Displays the Branch ID (BID) of the subnet.
In the example above, the controller displays bid-per-subnet-per-branch i.e., for "LA"
branch, BID "2" for the ip-range "10.15.205.0-10.15.205.250" with client count per branch
"5"). If a branch has multiple subnets, it can have multiple BIDs.
If a branch is in UP state and does not have a Bid(Subnet Name), it means that the IAP is
connected to a controller, which did not assign any BID for any subnet. In the above
example, "Paris-CB:D3:16" branch is UP and does not have a Bid(Subnet Name). This
means that either the IAP is connected to a backup controller or it is connected to a primary
controller without any Distributed, L2 or Distributed, L3 subnets.
IAP-VPN Deployment |
252
Hide quick links:
Advertisement
Table of Contents
