Aruba IAP-335 User Manual page 345

To view this graph, click 2.4 GHz in the Spectrum section of the dashboard.
Figure 103 Channel Metrics for the 2.4 GHz Radio Channel
To view this graph, click 5 GHz in the Spectrum section of the dashboard.
Figure 104 Channel Metrics for the 5 GHz Radio Channel
Channel Metrics
Table 74: Channel Metrics
Column
Channel
Quality(%)
Availability(%)
Utilization(%)
WiFi Util(%)
Interference Util(%)
Spectrum Alerts
When a new non-Wi-Fi device is found, an alert is reported to the VC. The spectrum alert messages include the
device ID, device type, IP address of the spectrum monitor or hybrid IAP, and the timestamp. VC reports the
detailed device information to AMP.
345 | Spectrum Monitor
shows the information displayed in the Channel Metrics graph.
Description
A 2.4 GHz or 5 GHz radio channel.
Current relative quality of selected channels in the 2.4 GHz or 5 GHz radio bands, as
determined by the percentage of packet retries, the current noise floor, and the duty
cycle for non-Wi-Fi devices on that channel.
The percentage of the channel currently available for use.
The percentage of the channel being used.
The percentage of the channel currently being used by Wi-Fi devices.
The percentage of the channel currently being used by non-Wi-Fi interference plus Wi-
Fi adjacent channel interference (ACI)
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide