Uplink Preferences And Switching; Enforcing Uplinks - Aruba IAP-335 User Manual

10.Navigate to System > General > Show Advanced Options view and set the Extended SSID parameter
to Disabled.
11.Reboot the IAP to apply the changes. After the IAP reboot, the Wi-Fi and mesh links are automatically
enabled.
In the CLI
To configure Wi-Fi uplink on an IAP:
(Instant AP)(config) # wlan sta-profile
(Instant AP)(sta uplink)# cipher-suite<clear | wpa-tkip-psk | wpa2-ccmp-psk>
(Instant AP)(sta uplink)# essid <essid>
(Instant AP)(sta uplink)# uplink-band <band>
(Instant AP)(sta uplink)# wpa-passphrase <key>
(Instant AP)(sta uplink)# end
(Instant AP)# commit apply
To view the W-Fi uplink status in the CLI:
(Instant AP)# show wifi-uplink status
configured :NO
To view the configuration status in the CLI:
(Instant AP)# show wifi-uplink config
ESSID :
Cipher Suite :
Passphrase :
Band :
(Instant AP)# show wifi-uplink auth log
----------------------------------------------------------------------
wifi uplink auth configuration:
----------------------------------------------------------------------
----------------------------------------------------------------------
wifi uplink auth log:
----------------------------------------------------------------------
[1116]2000-01-01 00:00:45.625: Global control interface '/tmp/supp_gbl'

Uplink Preferences and Switching

This topic describes the following procedures:
Enforcing Uplinks on page 322
l
Setting an Uplink Priority on page 323
l
Enabling Uplink Preemption on page 323
l
Switching Uplinks Based on VPN and Internet Availability on page 324
l
Viewing Uplink Status and Configuration on page 326
l

Enforcing Uplinks

The following configuration conditions apply to the uplink enforcement:
When an uplink is enforced, the IAP uses the specified uplink as the primary uplink regardless of uplink
l
preemption configuration and the current uplink status.
When an uplink is enforced and multiple Ethernet ports are configured ,and if the uplink is enabled on the
l
wired profiles, the IAP tries to find an alternate Ethernet link based on the priority configured.
322 | Uplink Configuration Aruba Instant 6.5.0.0-4.3.0.0 | User Guide