Table of Contents
Advertisement
Setting the pass hold time (PASS HOLD)
Turning the momentary function ON/OFF (MOMENTARY)
NOTE
5-44
1.
Using the F1 key (MEAS) or the
MEAS MODE.
2.
Using the rotary knob, select NORM or MIN/MAX.
The hold time can be set to 0.2 s through 10.0 s (at a resolution of 0.1 s) for a PASS
judgement.
When HOLD is set, a PASS judgement is held until the STOP switch is pressed.
1.
Using the F2 key (PASS) or the
PASS HOLD.
2.
Using the rotary knob, set the pass hold time.
• Releasing the START switch with MOMENTARY on is equivalent to pressing the
STOP switch. As a result, in a programmed automatic test, the test is unable to
proceed to the next step if the step interval time is set to HOLD.
When MOMENTARY is on, the test continues as long as the START switch is held
down.
When MOMENTARY is set to ON, the tester performs a test only for as long as the
START switch remains pressed. Since this operation keeps the operator's hands
confined to the front panel of the tester or the optional START switch during a test,
it increases the safety of operations. Use of this function together with the optional
RC02-TOS (a remote-control box operated using both hands) further increases
safety.
The momentary function can be set using the SHIFT + F1 keys, regardless of the
location of the cursor. Each time the SHIFT + F1 keys are pressed, ON and OFF
alternate. The
mark on the screen is to the left of MOMENTARY.
When the
mark is to the left of MOMENTARY, settings can be made using the
rotary knob.
Turn the rotary knob clockwise
Turn the rotary knob counterclockwise : OFF
When ON is set, items are highlighted.
SYSTEM 1
SYSTEM 1
MEAS MODE
: NORM
PASS HOLD
: 10.0s
MOMEN
FAIL
DOUBLE
TARY
MODE
ACTION
F1
F2
F3
: ON
OFF
ON
MOMENTARY
FAIL MODE
DOUBLE ACTION
F4
F5
SHIFT
keys, move the cursor to
keys, move the cursor to
TOS9213S/ TOS9213AS
Advertisement
Table of Contents
