Kikusui TOS9213S Operation Manual page 75

Setting the test time (TEST TIME)
The time during which a preset voltage is applied to the DUT can be set to between
0.5 s and 999 s (at a resolution of 0.1 s for the 0.5 s to 99.9 s range and 1 s for the
100 s to 999 s range).
When the cursor is at TIMER, the rotary knob can be used to make settings.
1.
2.
3.
TOS9213S/ TOS9213AS
IR1 IR1
LOWER ON UPPER ON
10 − 0.01
V M
LOWER
VOLT LOWER UPPER
F1 F2 F3
To move the cursor to TIMER, press the F5 key (TIMER). (The
keys can also be used.)
Using the keys, move the cursor to the target digit.
Using the rotary knob, set the test time.
READY
TIMER ON
3.0
s
TIMER
F4 F5
SHIFT
5-27