Kikusui TOS9213S Operation Manual page 8

L N G
vi
Grounding
• This product is an IEC Safety Class I equipment (equipment with a protective con-
ductor terminal). To prevent electric shock, be sure to connect the protective con-
ductor terminal of the product to electrical ground (safety ground).
Installation
• This product is designed for safe indoor use. Be sure to use the product indoors.
• When installing products, be sure to observe precautions concerning installation
location. For details, see the respective page in the operation manual.
Relocation
• Turn off the power switch and then disconnect all cables when relocating the prod-
uct.
• Be sure the operation manual be included when the product is relocated.
Operation
• If any abnormality or failure is detected in the products, stop using it immediately.
Unplug the AC power cord. Be careful not to allow the product to be used before it
is completely repaired.
• Do not disassemble or modify the product. If it must be modified, contact Kikusui
distributor/agent.
Maintenance and checking
• To avoid electrical shock, be absolutely sure to unplug the AC power cord before
performing maintenance or checking. Do not remove the cover.
• To maintain performance and safe operation of the product, it is recommended that
periodic maintenance, checking, cleaning, and calibration be performed.
Service
• Internal service is to be done by Kikusui service engineers. If the product must be
adjusted or repaired, contact Kikusui distributor/agent.
TOS9213S/ TOS9213AS