Kikusui TOS9213S Operation Manual page 196

Making settings for a test program
8-4
On the tester's Program Settings screen (AUTO), set the TOS6200's memory num-
ber for the step in which an earth continuity test is to be conducted.
For details on program settings, see "5.11 Program"
Setting procedure
1.
Press the AUTO key to display the Program screen (AUTO).
2.
Using the rotary knob, select the number of the program to be created
or edited.
3.
With the target number selected, press the SHIFT + AUTO/EDIT keys
to display the Program Edit screen ("EDIT" appears at the top right of
the screen).
Step No.
00 : --UNTITLED--
AUTO AUTO
PRG
01 DCW 00-1.0s
02 IR 02-1.0s
03 EC 03-1.0s
INS DEL
Deletion of program steps
Insertion of program steps
4.
To enter or change program names, press the SHIFT + F1 keys to move
the cursor to the program name.
Using the keys, move the cursor to the target character.
Using the rotary knob, select a character.
Use characters from 20H to 7EH of the ASCII code (see Appendix "A.2 ASCII
Code 20H to 7EH").
If program names are not to be changed, move on to Step 5.
5.
If the cursor is at the program name, press the SHIFT + F1 keys to
move the cursor to the program step.
6.
Using the rotary knob or the
earth continuity test.
Position the cursor at the step to be inserted.
Press the F1 key (INS) to insert a step (DCW00-0.2s) at the cursor position.
7.
Using the key, move the cursor to "DCW" to the right of the step num-
ber.
8.
Using the rotary knob, select EC.
Program display
Program status
Program No.
Program name
Repeat settings
EDIT
keys, select the step number for the
TOS9213S/ TOS9213AS