Kikusui TOS9213S Operation Manual page 3

The first time the tester is turned on following delivery, the interlock
function activates and testing is disabled.
Before starting a test, read "6.3 INTERLOCK Connector" for the
procedure for starting up the tester using the interlock function.
About this manual
This operation manual describes the withstanding voltage tester
TOS9213S and TOS9213AS.
This manual is applicable to the Tester whose ROM version
number is:
You can check the version number on the opening screen at turning on the power
or by using the *IDN? message.
For the *IDN? message, see "7.4.1 Register-Related Messages and General Purpose
Messages."
When you contact us for any information about the Tester, please indicate
the ROM version number and serial number of the Tester. The serial number
is shown on the rear panel of the Tester.
TOS9213S/ TOS9213AS
Interlock Function
Ver. 1.4x
The opening screen (Example of ROM version is 1.20)
DC WITHSTANDING VOLTAGE /
INSULATION RESISTANCE TESTER
KIKUSUI ELECTRONICS CORP.
TOS9213S
Ver. 1.20
i