Table of Contents
Advertisement
KIKUSUI ELECTRONICS CORP., TOS9213S, 0, 1.40
*RST
Initializes the tester (to original factory-set settings). Note the settings made in the
INTERFACE screen will not be initialized.
For details on initialization, see "5.15 Initialization".
Response
*SRE
Sets or resets each bit of the service-request enable register, or inquires about the
contents of the register.
For details on the service-request enable register, see "7.5 Registers".
Message
Program data
(Example) To set the service-request enable register to #50H,
Response
To *SRE?, the contents of the service-request enable register are returned.
(Example) When Bit 5 and Bit 6 of the service-request enable register are set, 96 is
*STB
Used to inquires about the contents of the status byte register.
For details on the status byte register, see "7.5 Registers".
Message
Response
To *STB?, the contents of the status byte register are returned.
(Example) When Bit 5 and Bit 6 of the status byte register are set, 96 is returned.
TOS9213S/ TOS9213AS
Company name
Setting: *RST
Setting: *SRE_<value>
*SRE?
Query:
Data format: Hexadecimal or decimal
Set value:
00H to FFH (0 to 255)
Resolution:
1H (1)
*SRE #H50
returned.
*STB?
Query:
Model name
Version No.
Not used
7-11
Advertisement
Table of Contents
