Table of Contents
Advertisement
Description of Contents
Chapter 1 Preface
Chapter 2 Setup
Chapter 3 Precautions on Handling
Chapter 4 Part names and Functions
Chapter 5 Basic Operations
Chapter 6 Using Terminals and Connectors
Chapter 7 GPIB/RS-232C Interface
Chapter 8 Controlling the TOS6200
Chapter 9 Maintenance
Chapter 10 Specifications
Appendix
viii
This manual is composed of the following chapters:
This section provides an outline of the tester and explains its features and options.
This chapter describes the procedures from unpacking to installation to operation
checking.
This chapter describes the precautions to be followed in the handling of this tester.
When using the tester, take utmost care to ensure safety.
This chapter describes the names and functions of components such as switches,
displays, and connectors on the front and rear panels.
This chapter describes the procedures for conducting withstanding voltage and insu-
lation resistance tests.
This chapter describes the procedures for use of the connectors on the front and rear
panels.
This chapter describes the GPIB and RS-232C interfaces and the device messages.
This chapter describes the procedure for using the tester to control Kikusui's earth
continuity tester TOS6200 via the RS-232C interface.
This chapter describes the maintenance, inspection, and calibration of the tester.
This chapter describes the electrical and mechanical specifications for the tester.
Appendix describes the operating principle of the tester and ASCII code table (20H
to 7EH).
TOS9213S/ TOS9213AS
Advertisement
Table of Contents
