Kikusui TOS9213S Operation Manual page 178

PRGINS (PIN)
NOTE
7-54
Inserts a memory number into the specified step of a specified program. Following
the execution of this message, the tester automatically displays the program edit
screen.
Message
Setting: PRGINS_<program number, step number, mode
selection{1|2|3}, memory number>
PIN_<program number, step number, mode selec-
tion{1|2|3}, memory number>
Program data
Data format: Integer
Set value: 0 to 99
Resolution: 1
Program data
Data format: Integer
Set value: 0 to 99
Resolution: 1
Program data
Data format: Integer
Set value: 1: DCW; 2: IR; 3: EC
Program data
Data format: Integer
Set value: 0 to 99
Resolution: 1
• Do not skip a step number. Overwrite the existing step or add a new step after the
last step.
• Up to 500 steps can be used in a set of programs. For example, if 100 steps are set
for each of programs 0 to 4, no step is available for program 5.
(Example) To insert memory 3 for DC withstanding voltage testing into step 15 of
program 10,
PIN 10,15,1,3
<program number>
<step number>
<mode selection {1|2|3}>
<memory number>
TOS9213S/ TOS9213AS