Table of Contents
Advertisement
NOTE
• In a command message in each register, hexadecimal data can be used by adding
"#H".
• In a query message in each register, all response data is composed of decimals.
• For each bit of each register, 1 represents "set" and 0 represents "reset."
• The contents of the enable register are not backed up.
Status Byte register, Service-Request Enable register
Bit
7
"RQS
(Request)
6
"MSS
(Master Summary Status)"
"ESB
5
(Standard Event Status Bit)"
"DSB
4
(Device Status Bit)"
3
2
1
0
Event Status register
Bit
7
6
5
CME (Command Error)
4
EXE (Execution Error)
3
2
1
0
TOS9213S/ TOS9213AS
Not used with this tester
Confirms that a service request has been issued. Reset by being read by
series polling.
Logical sum of the status byte register and the service-request enable regis-
ter. Read by *STB?
Indicates that a bit of the event status register has been set
Indicates that a bit of the device status register has been set
Not used with this tester
Not used with this tester
Not used with this tester
Not used with this tester
Not used with this tester
Not used with this tester
Indicates a syntax error, data error, or our-of-range error
Indicates that an invalid message has been received during the test or in the
protection status
Not used with this tester
Not used with this tester
Not used with this tester
Not used with this tester
Description
Description
7-57
Advertisement
Table of Contents
