Table of Contents
Advertisement
Program data
Program data
(Example) To set scanner channels 1 through 4 to LOW, scanner channels 5
Response
To D:SCANW?, the settings for all 16 channels are returned as "setting 1" and "set-
ting 2" using 16 bits.
(Example) If scanner channels 1 through 5 are currently set to HIGH, channels 6
DCW:CONTACTCHECK (D:CCH)
Sets ON/OFF of the contact check function for a DC withstanding voltage test. Also
inquires about the status of the function.
Message
Program data
(Example) To set the contact check to ON,
Response
To D:CCH?, the current setting for the contact check is returned.
(Example) If the contact check is currently set to ON,
TOS9213S/ TOS9213AS
DCW:SCANW?
Query:
D: SCANW?
<setting 1>
Data format: Integer
Set value:
0 to 65535 (#HFFFF)
Resolution:
1
LOW is represented by 0 and HIGH by 1.
<setting 2>
Data format: Integer
Set value:
0 to 65535 (#HFFFF)
Resolution:
1
OPEN is represented by 1 and NOT OPEN by 0.
through 8 to HIGH, and the other channels to OPEN,
D:SCANW #H00F0,#HFF00
OPEN in setting 2 has priority over setting 1.
through 10 to OPEN, and the other channels to LOW,
"31,992" is returned.
Setting: DCW:CONTACTCHECK_<{ON|OFF}>
D:CCH_<{ON|OFF}>
DCW:CONTACTCHECK?
Query:
D:CCH?
Data format: Character
Set value:
OFF (0), ON (1)
D:CCH ON
1 is returned.
7-23
Advertisement
Table of Contents
