Kikusui TOS9213S Operation Manual page 197

9.
10. Using the rotary knob, set the TOS6200's memory number to be used.
11. Using the
12. Using the rotary knob, set the interval time (0.2 s to 9.9 s, HOLD).
13. In accordance with the above procedure, make settings for an earth
Test step
TOS9213S/ TOS9213AS
Using the key, move the cursor to the memory number.
key, move the cursor to the interval time to the right of the
memory number.
With the interval time set to HOLD, when the START switch is pressed, the
next step starts if the specified step is in the HOLD status.
continuity test in the program step.
Upon completion of settings, press the AUTO key to return to the Program
screen.
The Program screen displays the total number of steps thus set. The tester
enters the READY status.
Step No.
AUTO AUTO 00 : --UNTITLED--
PRG
01 EC 00-1.0s
02 IR 02-1.0s
03 EC 03-1.0s
TOTAL:10
Total number of steps
Program No.
Program name
Repeat settings
READY
8-5