System Tools; Configuration Menu. Introduction And Access - GIRBAU HS-6013 Operation Instructions Manual

10. SYSTEM TOOLS

The INTELI control offers a group of tools destined to preparing, personalizing, informing and controlling the
global operation of the washing machine.
Within this group of tools, there are two large groups or intervention areas:
CONFIGURING the system.

CONSULTING washing machine characteristics, executed programs and operations and alarms detected

by the washing machine control.
TEXT MESSAGES. The user can programme a text message that will appear after a certain operation time,

also programmable.
RECOVERY TANK CLEANER. Optional tool. It can only be seen when the drain option in the SETUP menu

has been configured as VALVE and PUMP double drain. The recovery tank is cleaned by the sequential
filling and emptying of the recovery tank allowing the elimination of residues from the inside of the tank.
Managing and using these areas appear on the screen in written text.
Accessing the TOOLS mode menus
The system TOOLS mode is accessed from the main menu (chapter 3).
Connect the general switch of the washing machine.
Open the washing machine door.
Activate the ON switch: position I. The home page will appear and then, the main menu.
If the washing machine is already operating, the main menu can also be accessed by pressing the
key.
Select the configuration icon and confirm the selection.
The distinct menus of the TOOLS mode appear.
Multi-function keyboard
Menu selection
Multi-function keyboard. Access to the selected menu

10.1. Configuration menu. Introduction and access

This intervention menu offers the possibility to activate or modify a group of parameters and values, distributed
among different submenus, which condition the washing machine's operation.
The submenus are:
Configuring the parameters for usage and programming (10.2)

Setting the clock

Configuring the card

Managing the security codes

Selecting the options and modifying the values of the distinct parameter are done using the keys on the washing
machine's control panel.
Multi-function keyboard. Selects the submenus, parameters, etc.
Validates the value of the parameter.
Multi-function keyboard. Modifies the value of the parameter or the programmable options.
Multi-function keyboard. Accesses the previous menu. Validates the value of the parameter or the
selected option.
Numerical keyboard
Modifies the values of parameters with numerical content.
Its usage is indicated in a specific way.
System tools
57
Code 429159
Rev. 15/0717