Description; Characteristics - GIRBAU HS-6013 Operation Instructions Manual

1. DESCRIPTION

WASHER EXTRACTOR DESIGNED TO WASH OR TREAT FABRIC IN A WATER BATH.

1.1. Characteristics

Construction characteristics:
 A washing machine capable of spinning at speeds of over 350G and up to 400G, without having to be
bolted down. The design of its suspension system: multi-directional springs and shock absorbers to cushion
up to 95% of the vibrations produced during the spin cycle.
 Stainless steel inner and outer drum. The openings in the drum blades promote the uniform distribution of
bath water and improve the yield of the washer both during the wash and the rinse cycles.
 The drum rotation is produced by an asynchronous motor of alternating current controlled by inverter.
 Hot and cold water connections with a safety mechanism to prevent contaminating by back-flowing into the
general potable water system.
 Large capacity drain valve.
 Water inlets and all product dispensers done using a common collector with an anti-siphon mechanism.
 Option for heating the bath using electric heaters or steam injection.
Functional characteristics:
 Operation control of the washer by microprocessor.
 Operation of the washer adaptable to the possibilities of the installation and the needs of the user.
 Temperature control done by hot and cold water mixer in accordance with the programmed temperature and
the activation of the heating system. Precision of +/- 2ºC (+/- 3.5ºF).
 Level control done with an electronic pressure transmitter.
 Series communication between the washer microprocessor and the inverter control of the motor. This
communication takes advantage of all the features offered by inverter technology which results in a
significant energy savings and an optimal management of the spin cycle. This in turn implies a significant
reduction in noise, vibration and wear on the washer components.
 Washing programs: availability of twenty pre-programmed programs.
 Seventy-nine free programs, programmable by the user.
 Programming, copying, modifying and erasing menus. These menus are viewed in graphic mode. This type
of viewing facilitates understanding the different operations.
 Memory card that allows storing programs from the washing machine memory and later introducing them
into other machines. Thanks to its programming system, the programs programmed into a washing machine
with INTELI control are usable in any washing machine with the same control.
 Creating programs at the machine itself or through a PC using the INTELI MANAGER TOOL (IMT)
developed by Girbau.
Multiple controls that assure the safe use of the washer.

Description
10
Code 429159
Rev. 15/0717