System Tools - GIRBAU HS-6013 Operation Instructions Manual

10. SYSTEM TOOLS

The INTELI control offers a group of tools destined to preparing, personalizing, informing and controlling the
global operation of the washing machine.
Within this group of tools, there are two large intervention areas:
CONFIGURING the system
CONSULTING washing machine characteristics, executed operations and alarms detected by the washing
machine control.
TEXT MESSAGES. The user can programme a text message that will appear after a certain operation time,
also programmable.
Managing and using these areas appear on the screen in written text.
Accessing the TOOLS mode menus.
The system TOOLS mode is accessed from the main menu (chapter 3).
• Connect the general switch of the washing machine.
• Open the washing machine door.
• Activate the ON switch: position I. On the screen, the initializing logo will appear and then, the main
menu.
• If the washing machine is already operating, the main menu can also be accessed by pressing the key
-↵---
Select the configuration icon and confirm the selection
The distinct menus of the TOOLS mode appear
5
Multi-function keyboard
Menu selection
6
SEL Multi-function keyboard. Access to the selected menu
10.1. CONFIGURATION menu. Presentation and access.
This intervention menu offers the possibility to activate or modify a group of parameters and values,
distributed among different submenus, which condition the washing machine's operation.
The submenus are:
Configuring the parameters for usage and programming (10.2)
Setting the clock
Configuring the card
Managing the security codes
Selecting the options and modifying the values of the distinct parameter are done using the keys on the
washing machine's control panel.
5
Multi-function keyboard. Selects the submenus, parameters...
Validates the value of the parameter
6
MOD Multi-function keyboard. Modifies the value of the parameter or the programmable options.
Multi-function keyboard. Accesses the previous menu. Validates the value of the parameter or the
↵
selected option.
Numerical keyboard.
Modifies the values of parameters with numerical content.
Its usage is indicated in a specific way.
System tools
37
--
Cod. 429159
Rev. 01/0306