Manually Releasing Of The Security Lock; Disassembling The Door Of The Washing Machine - GIRBAU HS-6013 Operation Instructions Manual

14.3. Manually releasing of the security lock

Specific information for HS-6023, HS-6024, HS-6032, HS-6040, HS-
6057, HS-6110, EH055, EH080, EH090, EH130, EH255 models.
In order to open the door in case of a power supply failure, completely
insert a 0.2 in (3 mm) and an approximate length of 4 inches (100 mm)
bar through the hole located on underside of the safety lock cover and at
the same time turn the handle downwards.
MANUAL OPENING OF THE SAFETY LOCK MUST ONLY BE
USED IN SITUATIONS OF LACK OF POWER SUPPLY, FAILURE
OR JUSTIFIED EMERGENCY.
NEVER USE THE MANUAL RELEASE OF THE LOCK AS A USUAL
WAY TO OPEN THE DOOR.
BEFORE MANUAL RELEASING THE SAFETY LOCK, VERIFY
THAT THE BATH LEVEL DOES NOT EXCEED THE DOOR
OPENING LEVEL.

14.4. Disassembling the door of the washing machine

CAUTION
Only by the Authorised Technical Service except in emergency
situations. Procedure recommended in problems caused by a
failure in the realising of the door of the machine.
Specific information for HS-6013, HS-6017, HS-6023- HS-6024, HS-
6032, EH030, EH040, EH055, EH060, EH080 models.
Before disassembling the door of the washing machine:
 Verify that the bath level does not exceed the door opening
level.
 Close and mechanically interlock the manual water supply
valves.
 Close and mechanically lock the manual steam inlet valve
(steam heated washing machines).
 Disconnect and mechanically lock the External Automatic
Switch or the switch disconnector of the washing machine.
Door disassembly.
 Remove the protective caps of the hinge locking screws (Fig.
14.2). In models HS-6024, HS-6032, EH040 and EH080, first
remove the plastic guard (Fig.14.3/A).
 Disassemble the hinge locking screws (Fig. 14.4).
Troubleshooting
WARNING!
72
Fig. 14.1
Fig. 14.2
Fig. 14.3
Fig. 14.4
Code 429159
Rev. 15/0717