Executing Programs; Starting The Washing Machine. Main Menu; Loading The Washing Machine. Selecting And Starting A Wash Program - GIRBAU HS-6013 Operation Instructions Manual

4. EXECUTING PROGRAMS

MAN


4.2. Loading the washing machine. Selecting and starting a wash program

Select the icon of the program to be executed. Use the
function keyboard.
Confirm with the
:
Possible icons
Door closed.
Before starting a wash program, opening the washing machine door is imperative.
Group the fabrics to be washed in homogeneous loads, trying to reach the nominal value of the
load. Empty all pockets, fasten buttons, close zippers and remove accessories that are not
machine-washable. It is not recommend mixing whites with other colours.
Open the door and load the machine. The LED of washer loading and program selection blinks.
Washer load recommendations according to the type of fabric to wash:
Cotton fabrics: nominal load
-
Synthetic fabrics: between 80% & 90% nominal load
-
Delicate fabrics: between 35% & 50% nominal load
-
Do not overload the machine; the door must be able to close easily.
While door is open the icon indicating door open is displayed on the screen.
Health and safety instructions for loading and unloading the washer
In models with a smaller capacity, installing washing machines on raised bases, in accordance
with the instructions set out in the corresponding installation manuals, aids in loading and
unloading the machine by avoiding the need to adopt awkward positions.
The TILT SYSTEM and EASY LOAD options aid the loading and unloading operations.
Use linen collecting and transporting containers that are of a suitable height for the washer size.
Consult the sizes of the washing machine in the corresponding installation manual.
Take care not to overload the machine. Overloading the washer leads to excessive strain when
processing the linen.
Certain chemical products that are used in the washing process are toxic. Handle them with care
and wear appropriate protection.
Follow the legislation and regulations for Health and Safety in the Workplace in force in the
country where the machine has been installed.
Close the door. The last five executed programs are displayed on the screen.
Select program desired. Use either the multi-function keys or the numerical keyboard.
To start a wash cycle, press the
Executing Programs

4.1. Starting the washing machine. Main menu





OK

key.
Open the manual water inlet valves.
Open the manual steam inlet valves (steam heated
washing machines).
Connect the general switch of the washing
machine. Activate the ON switch: position I.
The home page will appear and then, the MAIN
MENU.
and
key on the multi-function keyboard.
15
keys on the multi-
Code 429159
Rev. 15/0717