Info Screen - GIRBAU HS-6013 Operation Instructions Manual

PROG. 36
PHAS. 1 2 3 4 5 6 7 8
4 min
i
RH-OFF
MODIFYING THE DURATION OF A PROGRAM
Once a program is started, the user can modify the rotation and/or spin time. This intervention will always be
possible if the time icon associated with the rotation or spin function appears.
Advancing the program and accessing in order to execute the functions on the following screen is also possible.
Intervention keys on the multi-function keyboard.
Increase the rotation or spin times
Decrease the rotation or spin times
Key for advancing to the following function screen

4.4. INFO screen

Screen that gives diverse information to the user.
This screen is accessed by pressing the key
exited by pressing the
Content of information:
Weight of the load (%, kg or lb): (only for machines with LOAD DETECTION option enabled in Menu

10.2.1. General operation parameters).
Bath level: Column of bath detected by pressure switch.

Bath level used (%): (Only on machines with the PROPORTIONAL BATH LEVEL option activated in

Menu 10.2.1. General operation parameters). This reports the percentage of the bath level used to adapt to
the reduction in linen load. This information may vary in each phase.
Internal temperature: Value in centigrade or Fahrenheit of the bath depending on the washing machine

configuration.
Programmed temperature: Value in centigrade or Fahrenheit according to the washing machine

configuration.
Unbalance: Level of unbalance detected (visible during spinning).

Motor power (%): Level of power absorbed by the motor.

Clock: Local time (see Section 10.3)

Executing Programs
Bath drainage screen
16:43
Information about:



(Consult the meaning of icons in sections
7.3.14...7.3.16)
+

key again.
Drum speed during the bath drainage cycle
Spin time
Buzzer
on the multi-function keyboard. This screen is
17
Code 429159
Rev. 15/0717