GIRBAU HS-6013 Operation Instructions Manual page 64

ROTATION (Start and stop sequences)
Modifying the start and stop times of the five pre-established rotations is possible.
Programmable range:
ON: minimum: 1 second; maximum 25 seconds
OFF: minimum: 1 second; maximum: 55 seconds
Minimum start and stop time: 15 seconds
Values programmable by the numerical keyboard.
To maintain the order criteria from lowest to highest, the ON time of each rotation can't never be less than
the start time of the lower rotation and will always be equal to or higher than the start time of the higher
rotation.
Programming limits and table of factory settings
WR
WR1
WR2
WR3
WR4
WR5
WASH ROTATION SPEEDS
Modifying the value of the four drum rotation speeds in the wash cycle within the established limits is possible,
always respecting the ordering criteria from lowest to highest.
The value of each speed is expressed in rpm and it should always be higher than the lowest spin value and
smaller than the highest spin value.
Values programmable by the numerical keyboard.
Programming limits and table of factory settings depending on the machine model.
HS-6013
WS
HS-6017 HS-6023
EH030
EH040
WS min
17
WS1
23
WS2
30
WS3
37
WS4
44
WS max
44
System tools
values by default (sec)
ON
5
5
5
15
25
washing speed by default, in rpm
HS-6024 HS-6032
EH055 EH060 EH080
16 16 16
22 22 21
29 27 26
36 36 36
43 42 42
43 42 42
programmable ON range
OFF min.
55
WR1  2seg.
10
WR2  WR1
25
WR3  WR2
15
WR4  WR3
5
WR5  WR4
HS-6040 HS-6057 HS-6110
EH090 EH130 EH225
13 13 13
19 18 17
26 24 22
33 30 27
40 36 32
40 36 32
64
max.
WR1  WR2
WR2  WR3
WR3  WR4
WR4  WR5
WR5  25seg
programmable
ranges
minimum maximum
- - - - - - - - - - - -
WS min WS2 – 1
WS1 + 1 WS3 – 1
WS2 + 1 WS4 – 1
WS3 + 1 WS max
- - - - - - - - - - - -
Code 429159
Rev. 15/0717