GIRBAU HS-6013 Operation Instructions Manual page 23

CAUTION!
Because of the washer's tilting movement, there is crushing and shearing hazard between the tilting
elements and the building elements.
To prevent them, please follow these instructions:
Keep away from the rear of the washer during the tilt movement.

The tilting movements have JUST been designed as a system to facilitate the washer's loading and

unloading operations. USING THE TILT SYSTEM FOR OTHER PURPOSES, AND ESPECIALLY FOR
MAINTENANCE OPERATIONS, IS TOTALLY PROHIBITED. Should an individual become trapped,
consult the instructions for freeing a trapped person set out in Chapter 14.
DO NOT USE the washer until all the guards are properly located and adjusted.

In particular take special care to the tilt hinge guards.

DO NOT MISLEAD NOR CANCEL THE POSITION DETECTORS located on the machine brackets.

DO NOT MISLEAD NOR CANCEL THE PUSH-BUTTON that activate the drum's rotation with the door

open.
The pressure of the pneumatic circuit specific for tilting is controlled by a pressure regulator located on the

electrical panel, with a fixed adjustment of 5 kg/cm
REGULATOR.
TO AVOID THE RISK OF DRAGGING, NOBODY MUST TOUCH THE LINEN WHILE ACTIVATING THE

DRUM ROTATION DEVICE.
Because of the facility of rotating the drum with door open, during loading and unloading operations

NEVER MORE THAN ONE PERSON WILL OPERATE WITH THE MACHINE.
The washer is protected against possible incorrect handling, so machine must be in horizontal position

before selecting a tilting movement or starting a wash program.
To prevent accidents caused by being trapped between the door of the washing machine and the loading

opening, before starting any tilting movement, the washing machine door must be secured using the hook
located on the right-hand side of the door.
For safety reasons, when using the tilting system THE OPERATOR MUST KEEP THE WASHER DOOR

IN SIGHT AT ALL TIMES.
If the loading process involves handling clothing soaked in hot water, hands should be protected with

suitable gloves.
Executing Programs
(71 PSI). DO NOT MODIFY NOR MANIPULATE THIS
2
23
Code 429159
Rev. 15/0717