Technical Specifications; Tools Needed For Installation; Accessories In Machine - GIRBAU HS-6013 Installation Instructions Manual

1. TECHNICAL SPECIFICATIONS

1.1. Tools needed for installation

HS-6013; HS-6017; EH030; EH040

Shipping restraints ............................ open end wrench 11/16 inch. (17mm)

Shipping restraints ............................ tubular wrench 11/16 inch. (17mm)
HS-6023; HS-6024; EH055; EH060

Shipping restraints ............................ open end wrench ¾ inch. (19mm)

Shipping restraints ............................ offset ring wrench 3/4 inch. (19 mm)

Shipping restraints ............................ tubular wrench 3/4 in. (19 mm)
Common to all models

Clamps .............................................. nut driver 7mm

Water inlet filters ............................... open end wrench 1 3/8 inch. (34mm)

Covers fixing ..................................... open end wrench 1/2 inch. (13mm)

Water inlet hoses .............................. slip-joint pliers or pipe wrench diam. 1 1/2 in (35 mm )

Covers fixing ..................................... TORX T25 screwdriver

Covers fixing .................................... TORX T20 screwdriver.

Electrical requirements ................... Phillips 2 screwdriver. (#2)

External dosing connection .............. slotted-head screwdriver 3mm.

Vending circuit connection ................ slotted-head screwdriver 3mm & Philips 1 (#1)

1.2. Accessories in machine

Keep all machine instructions in a safe place.
ACCESSORIES
Drain hose ........................................... 1
Drain clamp ......................................... 1
Cold water inlet hose (1) .................... 1
Hot water inlet hose (1) ...................... 1 (2)
Water inlet couplings ........................... 2 (3)
Water inlet filter ................................... 2 (3)
Water inlet hoses gaskets ................... 6 (4) (5)
Steam inlet filter and valve (6) ............ 1
Water inlet coupling (7) ...................... 1
Top cover key ...................................... 1
Coin meter box key (8) (10)................ 1
Coin meter tokens (8) (10) ................. 10
Fuses ................................................... (9)
Installation handbook .......................... 1
Operation handbook ............................ 1
Parts handbook (1) .............................. 1
Documentation ................................... (10)
Technical specifications
QUANTITY NOTES
(1) not available USA / Canada
(2) machines with third water inlet: 2 units
(3) machines with third water inlet: 3 units
(4) machines no USA/Canada with third
water inlet: 9 units
(5) machines USA/Canada 2 units, with
third water inlet: 3 units
(6) steam heating machines
(7) only machines in USA / Canada with
steam heating
(8) Coin control models only
(9) depending on model and voltage
(10) depending on target country
7
Cod.nº 429043
Rev. 15/1215