Setting The Clock - GIRBAU HS-6013 Operation Instructions Manual

SPIN SPEEDS
Modifying the value of the spin speeds within the established limits is possible, always respecting the
ordering criteria from lowest to highest.
The value of each spin speed is expressed in rpm and it should always be higher than the lowest spin value
and smaller than the highest spin value.
Values programmable by the numerical keyboard
Programming limits and table of factory settings depending on the machine model.
E
HS-6013
EH030
E2
100
E3
400
E4
600
E5
800
E6
1000
spin speed by default, in rpm
E
HS-6040
EH090
E2
79
E3
325
E4
490
E5
680
E6
870

10.3. Setting the clock

The washing machine clock will allow the delayed start of programs (see section 4.7).
This menu permits setting the clock.
Access the set clock menu. The following parameters appear:
Minute ......................... nn
Hour ............................ nn
Day week .............. --------
Day month .................. nn
Month .......................... nn
Year ........................... .nn
System tools
spin speed by default, in rpm
HS-6017 HS-6023
EH040 EH055
100 87
375 330
570 525
750 725
950 920
HS-6057 HS-6110
minimum
EH130 EH225
no modif.
72 66
no modif.
300 250
450 405
625 565
800 725
Modify the value of each parameter using the ·MOD· key on the multi-function
keyboard. The numerical values can also be modified by using the numerical
keyboard.
Access to the next parameter or going to the previous menu confirms the
selection.
The numerical values must be formed with two digits. Example:
third day of the month ........ 03

month of November ........... 11

year 2005: .......................... 05

HS-6024 HS-6032
EH060 EH080
86 83
350 335
550 530
725 698
966 931
programmable
ranges
maximum
no modif.
no modif.
E3 + 1 E4 def.
E4 + 1 E5 def.
E5 + 1 E6 def.
65
programmable ranges
minimum maximum
no modif. no modif.
E2 + 1 E3 def.
E3 + 1 E4 def.
E4 + 1 E5 def.
E5 + 1 E6 def.
Code 429159
Rev. 15/0717