Access To Programming A New Program; Identifying The New Program - GIRBAU HS-6013 Operation Instructions Manual

7.1. Access to programming a new program

The PROGRAMMING mode is accessed through the main menu.
Connect the general switch of the washing machine.

Open the washing machine door.

Activate the ON switch: position I. The home page will appear and then, the main menu.

From the open-door position, if the washing machine is already in operation, the main menu can be accessed

by pressing the
Select the programming icon and confirm the selection.
Select the programming icon of a new program and confirm the selection. The program number
selection screen is accessed.
The INTELI control provides 79 programs free of content to be programmed.
On the program list, the first free program appears, selected by default. However, the user can select
any free program to be programmed by using the arrow keys or the numerical keyboard.
Confirm the selection.

7.2. Identifying the new program

PROG. 32
I _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Using the numerical keyboard:
Thekeys allow introducing alphanumerical characters. The characters are
displayed sequentially.
The keys accept the character selected and moves the cursor one position to the
right in order to introduce a new character.
Pressing the key  for the first time, introduces a space.
The C key erases the letter to the left of the cursor.
Confirm with
Programming the type of fabric associated with the program.
This parameter makes it possible to associate a type of fabric with the program, in order to be able to
automatically detect the load and apply a reduction of water and chemical products
The different programmable options appear simultaneously on the screen. The options can be selected using
the arrow keys.
Requirements that allow the programming of this function:
Machines with load detection system configured as AUTO in the SETUP menu.

Programming a new wash program
key.
17:49
Programming the program name
On this screen, it is possible to program an identifying name
to the program by using the different numerical keys.
At the upper part of the new screen, the selected program
appears.
The cursor is located in the central square.
OK
key. The next screen is accessed.
Optional programming.
proportionally.
36
Code 429159
Rev. 15/0717