Service Removal; Dismantling; Code - GIRBAU HS-6013 Operation Instructions Manual

16. SERVICE REMOVAL

 Removing the washer from service requires the Authorised Technical Service or a company specialised in
management of waste.
 Never release the washer unsecured.
 To release the washer and subsequent transportation, refer to the same specifications and cautions
indicated for Installation.
When removing the machine from service:
 Disconnect the external switch and lock it mechanically. Remove the power wires.
 Close and mechanically interlock the manual water supply valves. Remove water supply hoses.
 Assemble the shipping restraints.
 Disassemble the door of the washing machine (consult the Authorised Technical Service).

16.1. Dismantling

Most of the machine's components are made with recyclable or recoverable materials.
The injected pieces bear information on the materials that were used to make them.
The main materials are:
 Steel plates
 Stainless steel plates
 Aluminium
 Borosilicate glass
 Polypropylene (PP)
 EPDM and NBR elastomers
 Electronic components
Management of waste electronic equipment
The manufacturer is obliged to advise that in compliance with directive 2002/96/EC about
management of waste electronic equipment:
The electronic components installed in the washing machine, must be dismantled and delivered
to treatment facilities authorised for this purpose.
Service removal
82

Code 429159

Rev. 15/0717