Delayed Start Of A Wash Program; Unbalance Control - GIRBAU HS-6013 Operation Instructions Manual

DOOR FITTED WITH SAFETY LOCK
Never attempt to open the door if:
the program has not finished.

the drum has not come to a complete halt.

the bath has not been completely evacuated.


4.8. Delayed start of a wash program

Allows the user to program the start time of a wash cycle.
 Programming the start time:
 Load the washing machine, close the door and select the wash program.
 Press the C key on the numerical keyboard. On the screen, the current time will appear. Format of 24 hours.
 The
selected blinks.
 Program the desired starting time on the numerical keyboard and confirm with the
time remains on the screen.
 The STOP key or the

4.9. Unbalance control

Before starting spin, the electronic control of the washing machine checks the correct distribution of the load.
If it detects that the load is not well distributed and that can cause an excessive unbalance during the spin, a new
positioning of the clothes will be carried out.
If there's still unbalance during the spin of the last phase, the washer can end the washing cycle reducing the
spin speed.
Three unbalance levels, which cause different reactions in the washing machine, have been established.
The unbalance level detected is viewed on the INFO screen when the washing machine executes the spin cycle.
 NO unbalance ............ : allows any spin cycle.
 LOW unbalance ......... : allows medium speed spin cycles and high speed spin cycles after a certain
 MEDIUM unbalance .. : allows medium speed spin cycles; after a certain number of attempts, it reduces
 HIGH unbalance ........ : does not allow the spin cycle.
As a safety feature, a microswitch monitors the movement of the washer suspended group. It is only activated in
cases of extreme unbalance. This device prevents executing spin cycles.
To improve the efficiency of the spin of the washer it's advisable to:
 Load the washing machine up to its nominal value, using the total capacity of the drum.
Load the washer with homogeneous loads.

Executing Programs
keys of the multi-function keyboard allow selecting minutes / hours. The value being
keys on the multi-function keyboard cancel the delayed start.
number of attempts.
the speed of the high spin cycles.
20
key. The start
Code 429159
Rev. 15/0717