Systems To Aid Loading And Unloading - GIRBAU HS-6013 Operation Instructions Manual

4.10. Systems to aid loading and unloading

The systems to aid loading and unloading are options that apply to washing machine models HS-6040, HS-6057,
HS-6110, EH090, EH130 and EH255.
The EASY LOAD SYSTEM. This system aids washer loading by running a filling sequence of hot or cold water
and rotating the drum to compress the clothes, thereby enabling the machine's capacity to be used to the full.
This sequence takes around 90 seconds.
After the sequence has ended, the water introduced in will remain inside the machine, even when the door is
opened, in order to be used in the wash cycle.
During the loading sequence, the bath level and rotation time cannot be altered.
To aid the unloading of the linen, a system of buttons allows the user to turn the drum with the door open.
To be able to use the EASY LOAD system, this option (Board A10) needs to be installed in the machine and
activated in the SETUP menu.
The TILT SYSTEM. The TILT SYSTEM consists of a system of pneumatic actuators and an auxiliary electric
control that allows the washer to be tilted forwards and backwards to assist loading and unloading while the door
of the machine is open.
At the same time, by operating the corresponding control devices, the drum rotation can be started at a low
speed.
With the machine in the loading position, a water inlet can be opened (cold or hot) to soak the dry linen and
reduce its volume. The maximum water level allowed in this situation is limited by the program. The water used
during this process will be kept inside the washer when a new cycle is started. To drain the water used during
the loading process, turn the O/I switch on the machine's control panel off and on again.
To be able to use the TILT SYSTEM this option (Board A10) needs to be installed in the washer and activated in
the SETUP menu, with the TILT SYSTEM parameter activated.
The TILT + EASY LOAD SYSTEM. This is a combination of the two systems mentioned above. During loading,
the washer runs a filling sequence of hot or cold water and rotates the drum to compact the clothes and thus use
the machine's capacity to the full. After the sequence has ended, the water introduced in will remain inside the
machine, even when the door is opened, in order to be used in the wash cycle.
To aid unloading, it allows the user to tilt the machine forward and rotate the drum at a low speed by operating
the corresponding control devices.
To be able to use the TILT + EASY LOAD SYSTEM control, this option (Board A10) needs to be installed in the
washer and activated in the SETUP menu, with the TILT SYSTEM parameter activated and the EASY LOAD
function activated in the GENERAL PARAMETERS menu.
The TILT SYSTEM and the TILT + EASY LOAD SYSTEM can be operated from the washer's control panel or
using the remote control.
To be able to use the remote control function, this option (Board A11) needs to be installed in the washer and
activated in the SETUP menu.
Executing Programs
21
Code 429159
Rev. 15/0717