Table of Contents
Advertisement
1. TECHNICAL SPECIFICATIONS
1.1. Tools needed for installation
HS-6013; HS-6017; EH030; EH040
•
Shipping restraints ............................ open end wrench 11/16 inch. (17mm)
Shipping restraints ............................ tubular wrench 11/16 inch. (17mm)
•
HS-6023; HS-6024; HS-6028; HS-6032; EH055; EH060; EH070; EH080
Shipping restraints ............................ open end wrench ¾ inch. (19mm)
•
•
Shipping restraints ............................ offset ring wrench 3/4 inch. (19 mm)
Shipping restraints ............................ tubular wrench 3/4 in. (19 mm)
•
Common to all models
Clamps .............................................. nut driver 7mm
•
•
Water inlet filters ............................... open end wrench 1 3/8 inch. (34mm)
•
Covers fixing ..................................... open end wrench 1/2 inch. (13mm)
Water inlet hoses .............................. slip-joint pliers or pipe wrench diam. 1 1/2 in (35 mm )
•
Covers fixing ..................................... TORX T25 screwdriver
•
•
Covers fixing .................................... TORX T20 screwdriver.
•
Electrical requirements ................... Phillips 2 screwdriver (#2).
External dosing connection .............. slotted-head screwdriver 3mm.
•
Vending circuit connection ................ slotted-head screwdriver 3mm & Philips 1 (#1)
•
1.2. Accessories in machine
Keep all machine instructions in a safe place.
ACCESSORIES
Drain hose ................................................. 1
Drain clamp ............................................... 1
Cold water inlet hose (1) .......................... 1
Hot water inlet hose (1) ............................ 1
Water inlet couplings ................................. 2
Water inlet filter ......................................... 2
Water inlet hoses gaskets ......................... 6
Steam inlet filter and valve (6) ................... 1
Water inlet coupling (7) ............................. 1
Top cover key ............................................ 1
Coin meter box key (8) (10) ....................... 1
Coin meter tokens (8) (10) ....................... 10
Fuses ......................................................... (9)
Installation handbook ................................ 1
Operation handbook .................................. 1
Parts handbook (1) .................................... 1
Documentation ......................................... (10)
Technical specifications
QUANTITY
NOTES
(1) not available USA / Canada
(2) machines with third water inlet: 2 units
(3) machines with third water inlet: 3 units
(2)
(4) machines no USA/Canada with third water
(3)
(5) machines USA/Canada 2 units, with third
(3)
(4) (5)
(6) steam heating machines
(7) only machines in USA / Canada with
(8) Coin control models only
(9) depending on model and voltage
(10) depending on target country
inlet: 9 units
water inlet: 3 units
steam heating
7
Cod.nº 429043
Rev. No. 21/0519
Advertisement
Table of Contents
