Executed Program Counters; Load Counters; Text Messages; Programming Messages And Moment Of Display - GIRBAU HS-6013 Operation Instructions Manual

11.4. Executed program counters

This counter registers the individual quantity of executions of each program. The counter increases at the end of
the program.
On the multi-function keyboard the DEL function appears. This function allows erasing the counter related to the
selected program.

11.5. Load counters

The use of this menu requires LOAD DETECTION to be activated in Manual mode or in Loading cells mode in
the General operating parameters settings menu.
This counter registers the quantity of linen washed in each machine program.
The counter increase is set by the value in kilograms or pounds introduced when starting each program and it is
executed at the end of the program.
On the multi-function keyboard the DEL function appears. This function allows erasing the counter related to the
selected program.

12. TEXT MESSAGES

This menu allows writing three text messages and determining when they appear after a number of hours
programmed.

12.1. Programming messages and moment of display

Access to the TEXT MESSAGES menu following the steps indicated in section 10.
The three text messages available appear on the screen.
An asterisk next to some of the messages indicates that the message is programmed.
Select one of the three messages and confirm the selection by the
The following screen appears.
In the position PROGRAMMED TIME, programme time the message has to appear using the numeric keyboard.
In the position ACCUMULATED TIME will appear the time elapsed since the message was programmed.
Press the key and access to the text line. Enter the text of the message. Follow the indications for text
writing in section 7.2.
Register in the memory the programming and start the time counting by pressing the
Other actions:
The· ·key on the multi-function keyboard re-initialises time counting.

Erase the programming of the message duration by programming 00000 in the position TIME

ACCUMULATED.
Erase the programmed message by key

Text messages
C
on the numeric keyboard.
key on the multi-function keyboard.
key.
Code 429159
Rev. 15/0717
69