Checking The Condition Of The Bearing Housing Seals; General Revision; Recovery Tank Cleaning - GIRBAU HS-6013 Operation Instructions Manual

15.7. Checking the condition of the bearing housing seals

Only by the Authorised Technical Service.
At regular intervals check that no water is leaking out of the bearing drain pipe located at the back of the washer
at the bottom. Water loss indicates that the seals are in poor condition and need to be replaced.

15.8. General revision

Only by the Authorised Technical Service.
As preventive maintenance action, it is very important to ask the Authorised Technical Service for a periodic
overhaul of the washing machine.
Recommended periodicity: every year or each 2000 washing cycles.

15.9. Recovery tank cleaning

Only by qualified personnel.
Action to be carried out only in machines with recovery tank installed.
Procedure described in section 13. System Tools.
Maintenance
81
Code 429159
Rev. 15/0717