Operator Presence Control - Kubota L2800 Workshop Manual

L2800, L3400, WSM

(4) Operator Presence Control

Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
HST Pedal Switch (HST Type)
1. Disconnect the HST neutral switch connector.
2. Remove the HST neutral switch (1).
3. Push the switch and measure the resistance between terminal 1
and 2, and between terminal 3 and 4.
4. If 0 ohm is not indicated, switch is faulty.
Resistance while
pushing the switch
(1) HST Neutral Switch
Clutch Pedal Switch (HST Type)
1. Disconnect the clutch pedal switch connector (2).
2. Measure the resistance between connector terminals while
pushing the clutch pedal switch.
3. If 0 ohm is not indicated, switch is faulty.
(1) Clutch Pedal Switch
Checking System
1. Sit on operator's seat.
2. Set the parking brake and stop the engine.
3. Shift the range gear shift lever to "NEUTRAL" position.
4. Shift the PTO gear shift lever to "OFF" position.
5. Fully depress the clutch pedal.
6. Start the engine.
7. Engage the PTO gear shift lever.
8. Stand up. (Do not get off the machine.)
9. The engine must shut off after approximately 1 second.
9-S11
ELECTRICAL SYSTEM
Terminal 1 - 2
0 Ω
Terminal 3 - 4
(2) Connector
(2) Clutch Pedal Switch Connector
W1035499
W1035966
W1037456
KiSC issued 08, 2007 A